Sunday, February 19, 2017
Saturday, February 18, 2017
I found this epoxy sealant from UHU at Lidl for a very low price and it appears to be perfect to repair damages of wipers on the wings.
It looks like gray modeling clay. You mix it during few seconds before to apply it. then it cures in 10 minutes. It can be drilled, sanded, painted. Really convenient and with a very good result.
Approved :) !
Sunday, February 12, 2017
Given the number of questions I still receive :) , I see that the concept of measuring the CoG location by measuring the weight at the leading edge and X mm behind is not fully understood, so let's explain again with a real case, my Stribog CoG:
2 kitchen scales measure the weight of the plane, separated in my case by 293 mm. The first scale measure the weight at the vertical of the leading edge, the second one 293mm behind, so behind the trailing edge.
In other words, the if I measure p and p' , and also that I know the distance a+b (293mm in my case), so that b = 293 - a, I can easily calculate the CoG location.
So now, let's do it for real. My Stribog is placed on the device: I measure 1475gr at the leading edge, and 834gr at 293mm of the leadging edge. After entering the formula in Excel, it gives me a CoG located at 105.83 mm from the Leading Edge.
Now if you want to set the CoG of a Plane, the formula give you the ratio between the 2 weights. The only inconvenience is that as you add or remove some weight in/from the nose, you need to recalculate every time you do an action.
Also, I noticed something critical, at least with the model of kitchen scales I used. The link between the 2 scales must be the most free possible (vertically and in rotation) to not disturb the measure of one scale. Also, I had to remove the scales from the wood plate I prepared as I suspect the scale to need only 4 contact points to work properly. The weight reading was totaly false until I realized that.
Wednesday, February 8, 2017
I finally found the time last week-end to assemble my CoG Machine, made from 2 kitchen scales, some aluminium and 3D printed parts. The 2 scales are glued on a wood place using some cartridge sealant. Prior to that, I did a trapdoor below to access the batteries. The 3D printed support is also sealed on the scale plates so everything is fixed together.
The advantage of this method compared to the usual CG balance is the repeatability of the measure.
I know that, since my first post on Facebook, some CoG machines are in construction here and there ;) ! This is good to know !
Sunday, February 5, 2017
Servorahmen.de has been the first company to introduce on the market servo frames years ago, covering almost all model of wings servo, but not only.
It is nice to see that they are following the LDS trend and adapting their products to customer needs.Here are few new products I received from Florian:
- MKS HV6130 servo IDS frame: The pocket includes a new specialized frame for the recent and great servo HV6130 from MKS. The frame features an external counter bearing, and 2 fixing position. I noticed that this frame can host the HBL6625mini or the DS6125mini. The frame is provided with a set of 4 servo head, with different axis distance covering the various needs (ailerons, flaps, etc ...). Then a very interresting set of plastic arms with different length from 48mm to 81mm so you can solve easily any installation whatever the position of the servo from the control surface. The material used for the control arms includes carbon (Carbon fiber reinforced polymer), so are very rigid.
- IDS control arms: The set of control arms, carbon reinforced (Carbon fiber reinforced polymer), is available separately and is compatible with other existing servo frames. I could check it on the MKS HBL6625 servo frame I bought from Hollein.
More pictures here: google photo
I finally exited from hibernation and had did my first flight of 2017. Past weeks were very cold with no wind so it was nearly impossible to fly. This time, on a slope near my home place, I had good weather, some south wind and 10°.
I flew my Stribog with 900gr of ballast. After 3 months without touching gimbal sticks, I'm happy to see that I still know how to pilot. Finally it is like bike, once learned you never forget :) ! This afternoon, I though also I could see the "death star" , but it was only the moon ;)
Yesterday we had a good friendly winter contest in Rognac, between Aix en Provence and Marseille. I left Grenoble aroudn 7am under the sn...
More information here A thumbs version will be available in september 2011 : DC-16 main features: HARDWARE: - Magnesium body - 3,...
For few monthes, JR propo is now proposing its own and proprietary 2.4 ghz system. After releasing the XG7, JR introduced second half o...
Wing covering with adhesive films By Pierre Rondel (Pictures: Gerard Prat, Thierry Martinet and Pierre Rondel) INTRODUCTION A...